eros:seedactuators:eeprom_restoring

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
eros:seedactuators:eeprom_restoring [2021/12/10 17:26]
SeedR KB Admin
eros:seedactuators:eeprom_restoring [2021/12/10 17:27] (current)
SeedR KB Admin
Line 22: Line 22:
 ==== Connecting via USB and applying external power ==== ==== Connecting via USB and applying external power ====
  
-Remove the small cover on the **side** of the unit to expose the USB connector.\\+1) Remove the small cover on the **side** of the unit to expose the USB connector.\\
 Connect the micro USB cable to the side of the unit. (this port is used for maintenance tasks) Connect the micro USB cable to the side of the unit. (this port is used for maintenance tasks)
  
-Next you will also need to apply power through the main connector to the unit.\\+2) Next you will also need to apply power through the main connector located on the back of the the unit.\\
 This is the main cable that you use to communicate with the Hand vis ROS or other frameworks. This is the main cable that you use to communicate with the Hand vis ROS or other frameworks.
  

Copyright © 2015-2020 Seed Robotics Ltd

  • eros/seedactuators/eeprom_restoring.txt
  • Last modified: 2021/12/10 17:27
  • by SeedR KB Admin